The PMK BumbleBee® high voltage differential probe series offers industry leading performance up to 500MHz bandwidth for today‘s power device design challenges, especially those using wide bandgap devices, such as SiC and GaN. The ±2000V, ±1000V, ±400V and ±200V differential and common-mode input voltage ranges makes BumbleBee® probes an ideal choice for designing and evaluating power circuits, such as switching power supplies, motor drives, inverter, IGBT circuits and frequency converters in the different voltage classes. BumbleBee® series probes have four adjustable input attenuation ranges allowing the user to select the voltage range needed to achieve the lowest noise and best possible resolution.
The probe is compatible with any oscilloscope with a 50Ω input impedance and has a user adjustable DC output offset correction range of ±4V (output referred).
All BumbleBee® series probes can be controlled from the controls located on the probe head or via remote control. The „PMK Probe Control“ software provides the ability for the user to control the probe remotely via a computer, and provides the user with a graphical user interface. The software is free of charge, and included with PMK’s 2ch and 4ch power supplies PS-02 and PS-03, which are required to power the probe. The PS-02 and PS-03 power supplies all have a USB interface and are available with optional LAN interface. The 1 channel battery pack power supply AP-01 provides >8h of portable and isolated operation, which allows the user the flexibility of where the probe can be used. The AP-01
supplies power only to the probe with no software remote control.
Download the software here: http://www.pmk.de/en/products/probecontrol
Find out more about AP-01 here: http://www.pmk.de/en/products/powersupplies
ISO17025 calibration upon delivery or as re-calibration is possible on request, KAL-DAKKS-BB.
The manual of the BumbleBee® up to serial number 1999 can be found here: Bumblebee® Manual
The required power supply is only included with the 2000V 2m BumbleBee® Quadpack. Please review the selection of power supplies below.
Models & Specifications
Order number | Article | Attenuation | Bandwidth (-3 dB) | Input Voltage | Differential Input Impedance | Rise time | |||
---|---|---|---|---|---|---|---|---|---|
880-102-501 | BumbleBee® ±2000V, 2m | 500:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||
250:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||||
100:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
50:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
880-102-504 | BumbleBee® ±2000V, 2m Quad Pack | 500:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||
including 4x 880-102-501, 1x 889-09V-PS3-L | 250:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | ||||
100:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
50:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
880-106-501 | BumbleBee® ±2000V, 6m | 500:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||
250:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||||
100:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
50:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
880-107-501 | BumbleBee® ±2000V, 7m | 500:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||
250:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 0.9 ns | |||||
100:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
50:1 | 400 MHz | 2000V peak | 10 MΩ || 2.5 pF | 1.0 ns | |||||
880-132-501 | BumbleBee® ±1000V, 2m | 250:1 | 500 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.8 ns | |||
125:1 | 500 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.8 ns | |||||
50:1 | 400 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.95 ns | |||||
25:1 | 400 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.95 ns | |||||
880-137-501 | BumbleBee® ±1000V, 7m | 250:1 | 500 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.8 ns | |||
125:1 | 500 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.8 ns | |||||
50:1 | 400 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.95 ns | |||||
25:1 | 400 MHz | 1000V peak | 5 MΩ || 2.5 pF | 0.95 ns | |||||
880-122-501 | BumbleBee® ±400V, 2m | 100:1 | 500 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.8 ns | |||
50:1 | 500 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.8 ns | |||||
20:1 | 400 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.95 ns | |||||
10:1 | 400 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.95 ns | |||||
880-127-501 | BumbleBee® ±400V, 7m | 100:1 | 500 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.8 ns | |||
50:1 | 500 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.8 ns | |||||
20:1 | 400 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.95 ns | |||||
10:1 | 400 MHz | 400V peak | 2.5 MΩ || 2.5 pF | 0.95 ns | |||||
880-112-501 | BumbleBee® ±200V, 2m | 50:1 | 500 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.8 ns | |||
25:1 | 500 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.8 ns | |||||
10:1 | 400 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.95 ns | |||||
5:1 | 400 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.95 ns | |||||
880-117-501 | BumbleBee® ±200V, 7m | 50:1 | 500 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.8 ns | |||
25:1 | 500 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.8 ns | |||||
10:1 | 400 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.95 ns | |||||
5:1 | 400 MHz | 200V peak | 1 MΩ || 2.5 pF | 0.95 ns |
Power Supplies (order separately)
Order number | Article | Mains | Output Current (max.) | Noise* | Channels | Output Voltage | Power | Immunity | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
889-09V-PS2 | 2ch Power supply for remote control with USB interface | 100-240 V AC, 47-63 Hz | 550 mA /Channel | 8 mV | 2 | ± 9 V | 20 W | EN 60601-1-2 | ||||
889-09V-PS2-L | 2ch Power supply for remote control with USB and LAN interface | 100-240 V AC, 47-63 Hz | 550 mA /Channel | 8 mV | 2 | ± 9 V | 20 W | EN 60601-1-2 | ||||
889-09V-PS3 | 4ch Power supply for remote control with USB interface | 100-240 V AC, 47-63 Hz | 550 mA /Channel | 4 mV | 4 | ± 9 V | 40 W | EN 60601-1-2 | ||||
889-09V-PS3-L | 4ch Power supply for remote control with USB and LAN interface | 100-240 V AC, 47-63 Hz | 550 mA /Channel | 4 mV | 4 | ± 9 V | 40 W | EN 60601-1-2 | ||||
889-09V-AP01 | 1ch Battery pack, >8hrs operation, no remote control | 700 mA DC | 1 | ± 9 V | 20 W | |||||||
890-520-900 | Probe connection cable 0.5 m ** | |||||||||||
890-520-915 | Probe connection cable 1.5 m |
(*) Bandwidth 20 MHz
(**) The power supply cable (0.5 m) is included as standard with all PMK probes requiring a PS02/03/AP01 power supply.