The HSDP2000 Series offers best-in-class performance >2GHz bandwidth, high input impedance, low noise, up to ±20V (40Vpp) differential input range, and 60V common mode voltage. The different models are ideal for in-circuit measurements for design, validation, debugging, and for characterizing a wide range of serial bus designs, as well as for a wide variety of analog signals, such as used in switched mode power supplies. It supports the most popular serial bus interfaces, such as USB2.0, Ethernet (GbE), CAN/LIN, I2C, SPI, SATA, FireWire (1394b), FlexRay, HDMI etc. ​

​

The HSDP2000 Series features the industry standard 2.54mm (0.1") socketed inputs that can easily interface to a variety of connectivity options available in the market. The compact probe head design, and its variety of accessories, makes the HSDP2000 Series ideal for probing on today’s smallest IC devices.​

​

​The ±12V input offset capability extends the dynamic input range of the probe. Having an input impedance of 1MΩ || <0.6pF between the probe tips, allows the HSDP2000 Series to be used to probe sensitive circuits without adversely loading the circuit under test.​

​

All models are available with either a 7.5m or 2m cable length. These longer cable versions enable the user to probe remote, hard to reach test points that are impossible with the other probing solution in the market today. ​

​

The HSDP2000 Series has a universal BNC output connector and is compatible with any oscilloscope with a 50Ω input impedance, or 1MΩ input impedance and a 50Ω feed-through termination, allowing the HSDP2000 Series to be used on any oscilloscope in the lab.​

​

HSDP2000-Series’ DC offset can be controlled via remote control. The "PMK Probe Control software" provides the ability for the user to control the probe remotely via a computer, and provides the user with a graphical user interface. The software is free of charge, and included with PMK’s 2ch and 4ch power supplies PS-02 and PS-03, which are required to power the probe. The PS-02 and PS-03 power supplies all have a USB interface and are available with optional LAN interface. The 1 channel battery pack power supply AP-01 provides >8h of portable and isolated operation, which allows the user the flexibility of where the probe can be used. The AP-01 supplies power only to the probe with no software remote control.​

​

Please download the software here: http://www.pmk.de/en/products/probecontrol

Programmer example

​

ISO17025 calibration upon delivery or as re-calibration is available on request.​