Notepad: On the product pages you can add product numbers with one click on the notepad symbol to the notead and later request information or quotes in one go.
0

The ATE2000 active probe, with up to 2.5GHz bandwidth and 6m long cable length, enables its use in the dynamic in-circuit measurements in the automated test equipment (ATE) environment. ATE2000 is specifically designed for use in automated 3D positioning systems, e.g. flying probers or other XYZ positioning systems. The flexible reference connection lead accessories ensure high bandwidth, >1GHz, repeatable measurements between test points that are up to 50mm apart while maintaining the best signal fidelity. The wide dynamic input voltage range of ±8V, up to 2.5GHz bandwidth and high 2MΩ||0.6pF input impedance, makes the ATE2000 a versatile probing solution for various applications, like automated failure analysis and trouble-shooting in service centers of electronic devices, or testing of safety-related electronics e.g. in autonomous fly and drive applications. The probe’s universal BNC interface is compatible with oscilloscopes with 50Ω input impedance. The ATE2000’s long 6m cable provides the ability to probe remote, hard to reach points.​

 

​​Unlike other single-ended probes the ATE2000 is equipped with a high impedance 1MΩ probe tip reference connection, which enables safe in-circuit testing of an energized circuit without the possibility for shorting the probe tip reference connection directly to earth ground and therewith damaging the circuit under test.​

ATE2000’s offset can be controlled via remote control. The "PMK Probe Control” software provides the ability for the user to control the probe remotely via a computer, and provides the user with a graphical user interface. The software is free of charge, and included with PMK’s 2ch and 4ch power supplies PS-02 and PS-03, which are required to power the probe. The power supplies all have a USB interface and are available with optional LAN interface. The new 1 channel battery pack power supply AP-01 provides > 8h of portable and isolated operation which allows the user the flexibility of where the probe can be used. The AP-01 supplies power only to the probe with no software remote control.​

Please download the software here: http://www.pmk.de/en/products/probecontrol  ​

ISO17025 calibration upon delivery or as re-calibration is available. ​

 

The required ground/reference accessory and power supply are not included. Please review the selection of power supplies below. If you need any non-published accessories, please contact sales{scrmblml}pmk.de

Models & Specifications

Order numberArticleAttenuationBandwidth (-3 dB)Input VoltageInput OffsetInput Impedance
 
add to Notepad
ATE20002.5 GHz active Probe, ±8V, 6m cable length10:1*)±20V±12V2 MΩ || 0.6 pF
 
add to Notepad
ATE-FLXGND5050mm flexible GND reference lead >1.1GHz   
 
add to Notepad
ATE-FLXGND3030mm flexible GND reference lead >1.6GHz   
 
add to Notepad
 
Image
890-400-812Ground Blade >2.5 GHz   

Power Supplies

Order numberArticleInput VoltageOutput Current (max.)Noise*ChannelsOutput VoltagePowerImmunity
 
add to Notepad
 
Image
889-09V-PS2PS-02 100-240 V AC, 47-63 Hz550 mA /Channel8 mV2± 9 V20 WEN 60601-1-2
 
add to Notepad
 
Image
889-09V-PS2-LPS-02-L; LAN 100-240 V AC, 47-63 Hz550 mA /Channel8 mV2± 9 V20 WEN 60601-1-2
 
add to Notepad
 
Image
889-09V-PS3PS-03 100-240 V AC, 47-63 Hz550 mA /Channel4 mV4± 9 V40 WEN 60601-1-2
 
add to Notepad
 
Image
889-09V-PS3-LPS-03-L; LAN 100-240 V AC, 47-63 Hz550 mA /Channel4 mV4± 9 V40 WEN 60601-1-2
 
add to Notepad
 
Image
889-09V-AP01AP-01 (Battery Pack)  700 mA DC 1± 9 V20 W 
 
add to Notepad
 
Image
890-520-900Probe connection cable 0.5 m **        
 
add to Notepad
 
Image
890-520-915Probe connection cable 1.5 m        

(*) Bandwidth depends on accessory.

(**) The power supply cable (0.5 m) is included as standard with all PMK probes requiring a PS02/03/AP01 power supply.

product search

 

electronica 2022

Munich, 15. - 18. November 2022

Hall A3 Booth 674

 

Since December 2018 PMK Mess- und Kommunikationstechnik GmbH is

DIN EN ISO 9001:2015 certified

 

We do not use any tracking cookies, but only session cookies that are necessary to perform the core functions.
Understood